-
Posted by dandnmurph on Jan 4th, 2009 at 10:32pm
detector going off
detector on 1st floor has gone off and registered 97 twice, two weeks apart.
It returns to zero on its own. Is there a problem?? It did not show the low battery symbol either time. We also have the same type of detector on the 2nd floor, only about 30 ft. from the 1st floor detector. The 2nd floo…
-
Posted by mpaterson2234 on Jan 4th, 2009 at 9:47pm
err peak level eo9
alarm is going off ang err is displayed anew alarm is placed and no alarm is set off
-
Posted by mikemarkmail on Jan 4th, 2009 at 10:26am
Manual
need manual
-
Posted by colson on Jan 4th, 2009 at 10:15am
Err message
KN-COP-DP: Intermittent beeping with "Err" message. I do not have owners manual. Thanks! Chris
-
Posted by starfire on Jan 3rd, 2009 at 3:11pm
intermitent beeping every couple hours
short beep sounds every couple hours. Started 2 days ago. Do you have a suggestion of problem?
-
Posted by manning-paterson on Jan 3rd, 2009 at 3:06pm
alarm won't shut off
i replaced batteries and now alarm won't stop. test reset button won't stop it. i hope I don't have to replace it. not very old!
-
Posted by photh on Jan 3rd, 2009 at 1:08pm
keep getting Err messages
Alram with Err message goes off even after 1 month of new battery installation
-
Posted by susanncharge on Jan 3rd, 2009 at 12:04pm
Problem
Err Message code 9
-
Posted by katmiller4 on Jan 3rd, 2009 at 10:03am
Carbon monoxide
My Nighthawk carbon monoxide plug in unit has an err message and beeps . Can't find the manual, what does this mean?
-
Posted by electmcc on Jan 3rd, 2009 at 8:53am
Battery alarm goes off.
Detector sounds off LB (Low Battery) even after installing a new battery after 4 weeks of use. I couldn't fix this detector so I replaced with another detector. This unit is supposed to have a 5 year warranty. Where do I send it for
replacement.
-
Posted by jls5 on Jan 2nd, 2009 at 4:04pm
Code 229, 230 & Err...
After installing a new battery and resetting unit, these codes appear.
What are they and can we get a list of what the codes mean.
-
Posted by stylinforu on Jan 2nd, 2009 at 6:26am
beeping
I don't know how to turn off the beep every 30 seconds... what do I do?
-
Posted by juliefig on Jan 1st, 2009 at 2:45am
lost manual
need to know what levels mean
-
Posted by dmskdpaxson on Dec 31st, 2008 at 3:45pm
won't stop beeping
Our electricity went out and our cabon monoxide alarm is beeping. We have others and they are not. I plugged it in outside and it is still beeping. My dog is going nuts. Help!
-
Posted by jpalmer603 on Dec 30th, 2008 at 6:52pm
expected life
How often should I replace my carbon monoxide detector?
-
Posted by blanchblackmond on Dec 30th, 2008 at 10:56am
Error
Beeps every 25 seconds
-
Posted by aimlessamers on Dec 28th, 2008 at 3:25pm
manual needed
need manual for 900-0089
-
Posted by nirotu on Dec 27th, 2008 at 2:24pm
Annoying beeps
It beeps every 30 seconds. Green light is on. If it is safe, how do I get rid of that annoying beep every 30 secs.
-
Posted by ellispaul4 on Dec 27th, 2008 at 12:32pm
manual
Can't find manual
-
Posted by tlach on Dec 25th, 2008 at 11:11pm
alarm always going off
i have changed the battery and now it seems like every 8-10 hours it starts beeping again...
-
Posted by msjack53 on Dec 24th, 2008 at 2:22pm
red light
the red light stays on, is this correct
-
Posted by kath.bill on Dec 23rd, 2008 at 6:44pm
manual
how to use
-
Posted by hlsmithpartyof8 on Dec 23rd, 2008 at 6:20pm
ERR code
ERR code, won't reset
-
Posted by jackqiao on Dec 23rd, 2008 at 3:07pm
beeps in every 20 seconds
my detector is KN-COB-HW. It beeps every 20 seconds starting from this afternoon. any thoughts? thanks.
-
Posted by jkcallahan05 on Dec 23rd, 2008 at 11:21am
ERROR
it keeps beeping and saying Error, even when I reset, what does this mean? how do i make it stop?
-
Posted by vestre on Dec 23rd, 2008 at 9:01am
Err on Nighthawk model KN-Copp-3
I have a new battery in my Nighthawk Coop-3 and it goes to 888 then 0 but after 5 minutes it goes to err and beeps. Please advise the problem.
thanks
Jack
-
Posted by johnoc on Dec 22nd, 2008 at 8:57pm
Beeps every 20 seconds
Beeps every 20-30 seconds. Can't find battery. Hardwired in. THoughts?
-
Posted by egrossman1 on Dec 22nd, 2008 at 1:04pm
Showing 207 and beeping
I've changed the battery 3 times and it beeps first shows Lb then shows 209, 207. Is there something wrong with this device. How do I get it to function properly?
-
Posted by mcveekee2000 on Dec 19th, 2008 at 4:10am
user manual/calibration
gas alert max 3-4 user manual for calibration purposes
-
Posted by anp5 on Dec 18th, 2008 at 2:01pm
how to open battery drawer
same
-
Posted by bobcorsi on Dec 17th, 2008 at 8:10pm
Error Message
Received error message and don't know what to do. Unplugging doesn't eliminate error message and beeping
-
Posted by pemconsulting on Dec 17th, 2008 at 5:08pm
error reading
Unit constantly reads err.
and beeps every 30 seconds...why?
-
Posted by moorecj01 on Dec 17th, 2008 at 1:38pm
Malfunction
I recently replaced the battery in my carbon monoxide detector. It was working fine for a day, and now it beeps and displays Err on the screen. What is wrong?
-
Posted by luvmy2bugs on Dec 15th, 2008 at 7:23am
Need Sleep
I have a Kidde 1235CA smoke detector and it has started going off when there is no fire and no reason for it to go off. It woke me and my family 5 times last night and 2 the night before. I have to shut off the breaker for a few seconds to make it stop, what is wrong and how do I make this stop we…
-
Posted by davebetty711 on Dec 14th, 2008 at 7:14pm
manual
alarm keeps going off, have put in new battery.Still goes off
-
Posted by t.fitz on Dec 14th, 2008 at 5:33pm
alarm went off
readout 110
-
Posted by arcycast on Dec 9th, 2008 at 10:15am
ERR code
my CO alarm has an ERR in the dispaly. what does that mean?
-
Posted by yeenarwong on Dec 9th, 2008 at 12:52am
Carbon Monoxide Detector beeping
It keeps beeping, what should I do?
-
Posted by steevecanuel on Dec 8th, 2008 at 6:53pm
err
It have err on the screen and it have a beep every 20 sec
-
Posted by daguiarg on Dec 8th, 2008 at 11:29am
ERR & beeping
Assembly # 900-0076-5
Date ofMFg: 2002, Aug 19
this product started to beep and display the letters Err.. We changed the batteries and reinsert into the wall electrical outlet but after 10 minutes it will start a beep and show the letters (err) again. What is wrong? What adjustment do we need to…
-
Posted by info on Dec 6th, 2008 at 4:02pm
Gas Reading
Bought Kidde alarm for my parents, as they use propane gas for heating. After using for about 2 months, they received a Gas alarm reading; alarm stopped and the display went back to "0" - but just wondering what might have caused. In such cases, should gas co. or fire dept be contacted?
-
Posted by jimrichardjr on Dec 6th, 2008 at 1:43pm
err message
has any of the other 5 messages gotten an answer or is this site a waste of time?
-
Posted by sunmooncelest13 on Dec 5th, 2008 at 6:10am
Need Manual
See a reading of 10 on the PPM CO window. Have some concerns.
-
Posted by jhulsebos on Dec 3rd, 2008 at 1:44pm
ERR Message
Unit displays ERR and beeps periodically. How can I correct this or is the unit defective?
-
Posted by gekaslaw on Dec 3rd, 2008 at 11:52am
need manual
need manual
-
Posted by gekaslaw on Dec 3rd, 2008 at 11:52am
need manual
need manual
-
Posted by stefanus.jonker on Dec 3rd, 2008 at 5:17am
calibratoin and drawing of eletronics
to chang the filter and do calibratoin on co detector
CS421 part number 315020 whant to no what is the 4 pots is for
-
Posted by jag on Dec 2nd, 2008 at 9:58pm
owner manual
went off inexplicably
-
Posted by sbucking27 on Dec 2nd, 2008 at 6:19pm
manual
looking for manual date 10/26/98
-
Posted by anthonyleamon on Dec 2nd, 2008 at 12:42pm
user manual
no instruction manual
-
Posted by dbmsdpc on Dec 2nd, 2008 at 7:39am
err message
it wont stop beeping . its an error message and i cant disconnect the unit
-
Posted by jspencer1 on Dec 1st, 2008 at 1:13pm
False alarms
This product started to send a siren sound today and I have no flames in my house. Reading was 438
I have an outdoor furnace that sends hot water into the house and also heats the hot water.
I can't understand how I could have Carbon Monoxide.
I have no open flames in my house.
-
Posted by kdrose on Dec 1st, 2008 at 8:31am
Alarm beeping
My alarm is going off but fire dept. didn't detect anything. Does the alarm go off if the back up battery is low?
-
Posted by cscanio1 on Nov 30th, 2008 at 5:37pm
Operational use of dectector
First Time User has questions, no manual Purchased by relative but I never usee it, I dont have the manual, do I just plug it in, do I need anything else. How will I know if its working? What level is high? THANK YOU FOR HELPING ME.
-
Posted by rthawk1 on Nov 26th, 2008 at 7:57am
error
Cannot find manual what does this mean?
-
Posted by lhollerud on Nov 25th, 2008 at 12:02pm
keeps beeping and reads error
KN-COP-DP Started beeping about every minute and shows err but can't reset. What should I do?
-
Posted by bartontj64 on Nov 25th, 2008 at 11:01am
model # kn cob lcp a
My detector just started beeping. One short beep about every minute. Should I be concerned?
-
Posted by cameronjennings1 on Nov 23rd, 2008 at 6:30pm
Beeping Sound
Nighthawk carbon Moanoxide Alarm that beeps with the green light on. Why is so difficult to find a manual and or someone to help rectify this situation.
-
Posted by marg374 on Nov 23rd, 2008 at 11:45am
alarm won't stop
I pulled out the module to stop alarm. Now, whenever I push it back in, the alarm comes on again, even though I am no longer in the environment in which it went off. The module is dated 9/2008. does this have something to do with it?
-
Posted by garlandhawkins on Nov 20th, 2008 at 8:37am
ERR display
I replaced the battery in this system but it continues to display the ERR message. I can't find the manual to this device. What should be my next step? Thanks
-
Posted by po665n on Nov 19th, 2008 at 2:26pm
ERR
How can i reset the ERR message?
-
Posted by mamamina2007 on Nov 17th, 2008 at 10:09pm
code:err. can't reset
after reseting attempt it reverts back to ERR. and the cycle of beeps begins
I've even replaced the battery hoping it would help.
-
Posted by chevelless5 on Nov 13th, 2008 at 11:49pm
need owners manual
not sure how item operates since i bought it off an estate sale. Can anyone get me a manual or give guidelines on how it operates? thank You
-
Posted by smokey61171 on Nov 13th, 2008 at 7:38am
beeping
keep beeping every 25-30 seconds
-
Posted by jrarkw on Nov 8th, 2008 at 5:06pm
error reading on unit
KN-COPP-3 - reads err 03 Why? I can not find the original manual It was mfg on 9/11/2000
-
Posted by gjbauer1 on Nov 8th, 2008 at 1:07pm
Need Manua
Need Manual
-
Posted by wallykramer on Nov 8th, 2008 at 10:12am
product manual
Turn off alarm proceedure.
-
Posted by mariannamonti on Nov 6th, 2008 at 4:20pm
manual
constant beeping evne when battery changed
-
Posted by dt.ngoan on Nov 5th, 2008 at 8:32pm
Order
Dear Sir/Madam,
Pls give me quotation for 05 pcs of Kidde KN-COPP-3 Nighthawk Plug-In Carbon Monoxide Alarm with Battery Backup and Digital Display.
We are trading company, so pls give the best price.
Pls also including freight charge to Hanoi, Vietnam.
I look forward to hearing from you…
-
Posted by essers01 on Nov 3rd, 2008 at 11:15pm
error
it beeps when on and registers err on the screen
-
Posted by plgunn on Nov 2nd, 2008 at 6:25pm
Chirp @20 sec.Display ERR.
Is this a servicable problem? If so how and where?
-
Posted by g1370 on Nov 1st, 2008 at 6:07pm
Carbon Monoxide
The low battery alarm went off,I changed the batteries and it resets with the error code.
-
Posted by nickelbackfan_20 on Nov 1st, 2008 at 1:43pm
L6
hello I have Kidde Carbon monoxide detector and i've tried placing it around the house and it says L6 and it keeps beeping i have no idea should i call the fire department about it or will it be okay?
-
Posted by jmgriff on Nov 1st, 2008 at 2:35am
Err is showing on display screen
The alarm is beeping intermittently every 25-30 seconds, and ERR is showing on the display screen.
-
Posted by awy247 on Oct 31st, 2008 at 1:49pm
1800 number to call
keeps beeping and appear "gas "..change battery but still doing the same
-
Posted by jvnlp on Oct 30th, 2008 at 9:52pm
Problems with your product
My detector keeps beeping with alert L6 what does this mean? I also have two dectors that will periodiclly start alarming for no reason so the fire department detects. How reliable is this product?
-
Posted by joannakwak on Oct 29th, 2008 at 11:26am
Alarm sounded
My alarm sounded and told me fire last night and then quickly ended. There was no fire...what could this have been?
-
Posted by stevmcke on Oct 27th, 2008 at 6:41pm
co alarm
I just bought co detector above and it keeps beeping.
-
Posted by johnsonsb1 on Oct 25th, 2008 at 3:53pm
alarm meaning
my detector alarmed and was also reading upward of 162 on the monitor as a co level what actions should i be taking when this happens
-
Posted by row83an on Oct 25th, 2008 at 11:21am
USE
DONT HAVE MANUEL
-
Posted by gwisniewski1010 on Oct 24th, 2008 at 10:40am
red light on and beeps
I have the carbon monoxide detector. It will beep about 2 in one min. And the red light will flash. The green light will stay on. Is this a danger or is it broken.
please help.
G.W
-
Posted by amandasvy on Oct 23rd, 2008 at 6:34pm
Not sure of model number or readings
The information regarding the model number of my nighthawk carbon monoxide detector is worn off. I have had this thing for 5-10 years now and for the first time EVER-in a home new to me- is giving off readings of 16, 26, and 192. The alrm itself isn't going off, but I'd like to know what the readi…
-
Posted by wendy on Oct 23rd, 2008 at 12:09pm
err
keeps beeping says err
-
Posted by copus on Oct 22nd, 2008 at 5:32pm
My alarm has err
My alarm indicates ERR. It appeasn with a line thru the sensor icon. What does this mean and what can I do to correct it.
-
Posted by memo20 on Oct 20th, 2008 at 9:18pm
First Time User has questions, no manual
Purchased by relative but I never usee it, I dont have the manual, do I just plug it in, do I need anything else. How will I know if its working? What level is high? THANK YOU FOR HELPING ME.
-
Posted by warsh726 on Oct 20th, 2008 at 10:22am
Readings
When I press "Peak Level" it indicates "19"..Always shows "0" while plugged into wall socket.
-
Posted by henryliamj on Oct 17th, 2008 at 6:32pm
acceptable levels
Manuals only start to tell you what happens at 100ppm.My detector say's 9.Is there such a thing as an acceptable level in the air????? Or should I be worried with a reading of 9.???
-
Posted by wags1065 on Oct 12th, 2008 at 9:13pm
manual
error message - what does it mean
-
Posted by donninger1 on Oct 10th, 2008 at 8:19am
manual
need a manual
-
Posted by rtinajero54 on Oct 5th, 2008 at 7:06pm
About manual
Where can I find de manual
-
Posted by eleanor.depaul on Oct 4th, 2008 at 4:14pm
err
error code and beeping sound
-
Posted by kimberlyd242003 on Oct 3rd, 2008 at 12:15am
Testing
When I tested my Kiddie digital battery operated carbon monoxide detector the number 231 appeared on the screen. What does this mean? Normally it is at 0. The detector has never gone off any other time, only when tested. Is this a factory set number? I have only had the detector about 2 weeks.
-
Posted by cempfield on Oct 2nd, 2008 at 10:00pm
reset and stop noise
I replaced the battery, but unit is still chirping and flashing LB. Pushing the reset button didn't help. What do I need to do?
-
Posted by grgoben on Oct 1st, 2008 at 11:31pm
This thing will not stop chirping
This detector will not stop chirping. I have changed out the battery twice. Finally I had to turn off the hardwire and disconnect the battery.
Anything you can offer is greatly appreciated.
-
Posted by tonyjudy1 on Oct 1st, 2008 at 11:16am
owners manual
I'm looking for an owners manual
-
Posted by perfectdt on Oct 1st, 2008 at 8:45am
replacing detector
How many years is a detector good for, when should it be replaced? Mine was assembled 8.20.01.
-
Posted by dawnhomeinteriors on Sep 30th, 2008 at 9:38pm
problems
error code is on the display and beeping.
-
Posted by carawallner on Sep 29th, 2008 at 6:34pm
Error message
Hello,
My alarm has an error message and I don't know what to do. Can you help troubleshoot?
-
Posted by mirrargordon101 on Sep 28th, 2008 at 11:50am
operating manual
I have no operation manual for this particular product. Please fporward
-
Posted by graberjoseph on Sep 24th, 2008 at 8:04pm
random alert
Its giving a gas signal with a number but i'm unsure of what represents. 235