-
Posted by acurijr500 on Oct 6th, 2008 at 4:36pm
PRINT
HOW DO I PRINT ENVElope
-
Posted by dmcbride63 on Oct 2nd, 2008 at 9:03am
Reset to manufacture defaults
I have forgotten the passwords and I need to reset to manufacture defaults?
-
Posted by fparker on Sep 30th, 2008 at 7:52pm
Manual Needed
Actually, I have a 16 port unit that I believe is an HX-16.
Is there a manual available fore it?
-
Posted by manaiaguide on Sep 30th, 2008 at 12:47pm
Set up
Donated hub switch that came without the directions of how set it up.
-
Posted by weinbergg on Sep 28th, 2008 at 1:17pm
requirethe manual
I do not have a manual so don't know how to sicth between pcs
-
Posted by vrchandrasekhar on Sep 26th, 2008 at 2:04am
a
a
-
Posted by pauline.davidson on Sep 23rd, 2008 at 5:03am
network scanner destination
can't add a destination address for scanning don't have network scanner operations manual
-
Posted by nate.bodine on Sep 23rd, 2008 at 12:40am
Audio AND Microphone?
So many sites say that you can use this switch for both audio AND microphone. However, there is only one audio port on the front. How can I connect a headset (containing speakers AND a microphone) and be able to use both parts of it with the switch?
-
Posted by roger63gon on Sep 16th, 2008 at 8:43pm
QDOCK DRIVER
I NEED THE DRIVER FOR A MAC OS X
-
Posted by grwelte on Sep 14th, 2008 at 10:37am
manual
Need to find the Addlogix Power Reach Elite 16 port PS/2 KVM controller manual, or how to reset password.
-
Posted by brjeremy on Sep 13th, 2008 at 4:16pm
Need a manual (and software?)
Compaq Server Console Switch (KVM) 3315
169968-001
Received one and need to know how to set up. Is software neede?
-
Posted by msariga on Sep 13th, 2008 at 11:39am
power supply voltages
I need to have shematic diagrams of gigaswitch 11/20 power supply (switch mode)Please send me msariga@hotmail.com
Thank you
-
Posted by jt44_2000 on Sep 10th, 2008 at 2:17pm
Looking for user manual
Looking for usermanual to see if LAG is supported.
-
Posted by zerepl on Sep 10th, 2008 at 1:52pm
keyboard problem
switch not recognizing keyboard
-
Posted by johnnyblack64 on Sep 6th, 2008 at 9:03pm
Playstation
The playstation and a computer can not be on the internet at the same time using the microswitch.
-
Posted by DEEPAK on Sep 6th, 2008 at 1:23am
SWITCH IS NOT WORKING
YESTERDAY WE HAD A VERY HEAVY RAINFALL ON THAT ALL MY DES-1008D SWITCHES AUTOMATICALLY GET OFF WHAT TO DO PLZ HELP ME.
-
Posted by tracywilliams on Sep 5th, 2008 at 8:28pm
Need a manual/instructions on the usage of this switch
I got this from a business that closed it's doors. I would like to use it in my home for switching between computers.
-
Posted by contact on Sep 4th, 2008 at 4:23pm
pass reset urgent
how can i reset this switch to the factory settings?? i lost the access code
-
Posted by bartonl on Sep 3rd, 2008 at 4:35pm
Console into switch
How do you console into a Dell powerconnect 2724 switch?
-
Posted by lylow on Sep 3rd, 2008 at 1:13am
DES-3226 Fast Ethernet Switch - How to Factory Reset
My company had purchased a Fast Ethernet model DES-3226 few years ago.
The people who configured the switch before has left our company. Now no one knew the login username and password.
May I know how to factory reset the switch ?
-
Posted by michaelwilliams on Sep 2nd, 2008 at 5:55pm
configuration
need default password settings. I can't log into my switch
-
Posted by claudelang on Sep 2nd, 2008 at 11:14am
documentation
A need the user's manual or the documentation related to this product.
Thanks,
Claude
-
Posted by jand56 on Sep 2nd, 2008 at 10:47am
fds
ssdsd
-
Posted by rfitch11 on Aug 31st, 2008 at 5:35pm
Power adapter
9Volt power supply
what is the polarity?
+ out and neg in tip
-
Posted by badboy on Aug 28th, 2008 at 6:52pm
lost my manual.
hi, coud eniwon help me find e manual of d-link router.
thnx
-
Posted by jacksally on Aug 27th, 2008 at 11:09am
Factory Reset
looking for how to factory reset ( default ) a DES-6000 chasis.
-
Posted by frankiekaren on Aug 27th, 2008 at 8:46am
power coard
no power cable
-
Posted by paal on Aug 26th, 2008 at 11:08pm
Reset of Switch
How do I reset the switch to factory default settings
-
Posted by larry.h.pfaff on Aug 26th, 2008 at 11:02am
Manual needed
need manual for AT-MR415T
-
Posted by mdebellis on Aug 21st, 2008 at 12:42pm
mouse pointer moves by self
The control unit will not reset so other users can get control ? any suggestions ?
-
Posted by chesterpridgeon on Aug 21st, 2008 at 2:47am
Management Console
Reset login ID and Password. Cannot login.
-
Posted by arkeep85 on Aug 20th, 2008 at 1:08am
need manuals
no internet conecting
-
Posted by arkeep85 on Aug 19th, 2008 at 11:26pm
manual
canot conect internet why. i need a confuger manual user guide
-
Posted by lj.strezov on Aug 19th, 2008 at 8:40am
Technical specification
Features of the switche
-
Posted by mark.kisa on Aug 17th, 2008 at 4:48pm
Programming
How to do it?
-
Posted by boby.costel on Aug 15th, 2008 at 7:23am
interfata web
IP defaults at-8000s
pentru interfata web
-
Posted by juergen.neuhoerl on Aug 15th, 2008 at 3:38am
AT-8524M
forgot password
-
Posted by tonyng on Aug 14th, 2008 at 5:54am
I am looking for the manual of Linksys SRW208P, thanks
SRW208P
-
Posted by hlsartistry on Aug 14th, 2008 at 3:13am
Need instructions on how to use
Do not have user manual for iogear (brand) miniview micro usb audio kvm switch 2 port. But want to use. Not sure of how to do it. Cables/hub are hooked up to both monitors. ready to go.
-
Posted by jan on Aug 13th, 2008 at 7:02pm
Operators Manual
Currently I have the installation manual, but this does not contain any configuration information for the switch. I am hoping to find the operators manual to determine if I can change the port forwarding configuration.
-
Posted by chat6541 on Aug 13th, 2008 at 2:42pm
software
where can i get software for the 8126xl switch
-
Posted by sriman on Aug 12th, 2008 at 3:22pm
mirror port
how to mirror port on this switch to use wiht a call recording software.
-
Posted by rain_of_26august on Aug 11th, 2008 at 12:25am
security
how can various port of switch 2312 can separate logically
-
Posted by mobashir.nayeem on Aug 8th, 2008 at 6:15am
Basic Command
How to configure valn , ip address on the interface & create subinterface on the switch?
-
Posted by mobashir.nayeem on Aug 8th, 2008 at 6:15am
Basic Command
How to configure valn , ip address on the interface & create subinterface on the switch?
-
Posted by donald.oder on Aug 6th, 2008 at 4:51pm
how many 508fx2's can you connect
how many 508's in series can I connect to the 7014tx before it becomes overloaded. each of the 508's will connect to a pc. data both ways will be constant. will use fibe to connect 508's to 7014. each 508 will be about 1/2 mile apart.
-
Posted by post on Aug 6th, 2008 at 3:33pm
software/manual
help me please? post@audioit.no
-
Posted by steinar.gundersen on Aug 6th, 2008 at 6:45am
admin guide
admin guide
-
Posted by smithd on Aug 5th, 2008 at 8:06am
ports going bad
I'm currently experiencing problems with the fiber ports. The ports are not transmitting
-
Posted by juice669 on Aug 3rd, 2008 at 3:09pm
CAN'T CONNECT
HELLO I HAVE TO PC AT HOME ONE LAPTOP AND ONE DESKTOP IM USING A THE ROUTER TO CONNECT AND AT FIRST ONLY MY LAPTOP WOULD CONNECT TO THE INTERNET AND THE DESKTOP WOULD ONLY HAVE LOCAL ACCES, AFTER ME MESSING WITH IT, RESETING MODEM ROUTER COMPUTERS I GOT THE DESKTOP TO CONNCET BUT NPW MY LAPTOP HAS L…
-
Posted by dh_rivera on Jul 31st, 2008 at 11:03am
Manual
i am looking for manual about brocade silkworm 4100 switch
-
Posted by manjunathada on Jul 31st, 2008 at 8:55am
cisco 6506 manual
We are not not able to configure portchannel on the switch. Can any one send us the manual of cisco 6506.
Thanks,
Manjunatha
-
Posted by fortymillion on Jul 29th, 2008 at 8:56am
Help!
Hi there, we have this Switch/Hub at the Millitary Police on Base here (Canadian Forces Base Bagotville) and I am unable to find any documentation on this, please help!
-
Posted by olatalks on Jul 24th, 2008 at 9:25am
switch manual
need to configure a switch sd 216
-
Posted by ekoy on Jul 23rd, 2008 at 11:27pm
Reset password
I' Have a AT-FS750/24 and i need to reconfigure the VLAN on the switch, but i'm forgot the password.
How to reset the password and configuration to factory default?
-
Posted by aurelio.e.livalencia on Jul 23rd, 2008 at 11:13am
manual
No problem, just access to manual
-
Posted by jan.nieuwpoort on Jul 18th, 2008 at 10:07am
USB1 or 2?
this little hub does not work?
-
Posted by ra_mrd on Jul 18th, 2008 at 4:12am
manual service
to need manual service konica minolta bizhub c350
-
Posted by paulf on Jul 18th, 2008 at 1:10am
Looking for Manual
Does anyone have a PDF of the manual for the sh2024e SmartEther Hub-Switch that can be emailed to me?
-
Posted by paulf on Jul 18th, 2008 at 1:05am
Server 2003 Conflict
I cannot log on to internet due to conflict with hub/switch
-
Posted by dead_in_a_hole on Jul 17th, 2008 at 4:27am
switching
front panel will not switch server
-
Posted by magjo on Jul 16th, 2008 at 4:08pm
Changing Settings
I actually have an SW722A-R3 KVM and need to get to the settings to change the timeout settings. I was told Cntrl-F12, but that doesn't bring up any menus.If there are instructions online, I will take the link to that also. Thanks for your help.
-
Posted by prathibha_namburu on Jul 15th, 2008 at 6:25am
Find the Doc
FiberSwitch Series; 12-Port 10BaseFL, 2 Port 100BaseFX Ethernet Switch, ST MMF, SC MMF, DB-25
-
Posted by kbri1700 on Jul 14th, 2008 at 10:18pm
Cisco 4006-S3 MTBF
I was after the MTBF data for this device
-
Posted by panderson43 on Jul 13th, 2008 at 9:22am
setup
monitor works fine with switch; keyboard and mouse work fine on one computer but not for the other. I don't know where my manual is! please help!
-
Posted by leongabel on Jul 9th, 2008 at 10:21am
Ethernet
interconnection diagram
-
Posted by lequocdo on Jul 8th, 2008 at 9:37pm
how to use
how to use this product
-
Posted by soloproproductionz on Jul 4th, 2008 at 2:13am
network setup
The Manual doesn't include how to setup a network between two pc's. Do I need to change IP addresses or anything else besides going throught the network setup wizard because I did all that...the client PC won't connect to the internet or there is limited activity - I've tried everything and just ne…
-
Posted by ito.shinichiro on Jul 3rd, 2008 at 7:48pm
manual
manual
-
Posted by silly2366 on Jun 30th, 2008 at 3:06pm
setup assistance
setup assistance
-
Posted by fhflee on Jun 30th, 2008 at 3:39am
circuit diagram and spare part for maintenance of SX650
As a maintainer of the Panasonic SX650, I would like to have the service manual and spare part required for the maintenance of the system.
-
Posted by clarkge on Jun 18th, 2008 at 10:40am
Linking Computers
I can't link th ecomputers together for printing capabilities
-
Posted by rafeeqkk123 on Jun 18th, 2008 at 5:46am
price and delearin U A E
price and delearin U A E
-
Posted by mfernest on Jun 12th, 2008 at 2:20pm
Product has stopped working
Nothing connected through the hub works. I have only two USB ports -- I need the hub to work!
-
Posted by neoyagami on Jun 6th, 2008 at 12:18am
Manual
Hi,
I sort of lost my manual & maybe software long time age due to burglary. Recently when pc got problem, i cannot re-install back. please assist.
-
Posted by nugraha_adi2001 on Jun 5th, 2008 at 8:09pm
Forget Password
Dear All,
How to reset password on this switch, I want to manage again this switch, but I forget that password
thanks
adi
-
Posted by quallroom on Jun 3rd, 2008 at 5:34pm
Hub issues
I have just purchased this hub and one of the ports seems to not be functional How do I go about getting a new one..
-
Posted by roberts on May 30th, 2008 at 2:52pm
Connecting switch to network
How to connect a TE100-S2424 to a network?
-
Posted by rbixby on May 29th, 2008 at 3:25pm
voltage required
I have the switch, not the power supply. what is the power requirement?
-
Posted by toddzaz on May 18th, 2008 at 7:25pm
INSTALATION
BOUGHT THIS ITEM AROUND 9 YRS AGO NEVER USED IT AND MISSED PLACED MANUAL
-
Posted by thewhat on May 17th, 2008 at 8:27am
switching from one device to another
can anyone tell me how to switch between computers using this kvm switch i.e what is the hotkey?
-
Posted by wahcom_111 on May 12th, 2008 at 6:13am
Password Problem
Sir I have forget password of this switch and now i want to mange it according to my requirements but i cannot enter into it please tell me the way to break it's password like cisco switchws have.
Thanks
-
Posted by awesome_vicky on May 5th, 2008 at 3:53pm
help regarding about port base VLAN configration
sir, plz help me about getting port base VLAN configuration. How to make different VLAN(in which VLAN1 member use internet and the other member which is in other VLAN can't use internet service. plz help me if u can.
-
Posted by nfanous on May 2nd, 2008 at 9:02am
Power adapter
My power adapter is causong the switch leds to blink constantly, I believe it is dead. The power adapter is made by BTC and it is a 6A output hard to find in retail stores. Where can I find one to replace it?
THanks
-
Posted by cosimo.negro on Apr 30th, 2008 at 1:28pm
Are there Switch Update Drivers
I've just been upgraded to Corporate Windows XP. Not sure if that has to do with my predicament...in either case, here goes....
Everytime I switch to my Mac & back to my PC, the monitor settings for the PC go to the basic screen setting. Could this be due to a required driver allowing me to maint…
-
Posted by adam.winebaugh on Apr 30th, 2008 at 12:13pm
Secondary Fibre channel switch
I am going to be installing a SECONDARY silkworm 2800 16 pt fibre switch to make our san redundant. I should just be able to hook this bad boy up and let it go, correct? Or is there anything else I will need to change/configure?
-
Posted by lupedj4 on Apr 29th, 2008 at 5:10pm
Something Missing
What do BNC mean Is it a Wireless or something
-
Posted by colorgraphic on Apr 29th, 2008 at 12:46pm
fan in this model
Hi, I have a Centre Com 8116, 10 Base-T/100Base - tx 16 Port Ethernet Switch with management and need to replace the fan inside. Don't want to have to take it down and open it if I don't have to, so I wondered if anyone knows what fan is inside and what a model number would be. Thanks, Sue
-
Posted by jse2carlos on Apr 28th, 2008 at 1:33pm
nao conecta
Kingston EtheRx KNE16TP/SE
-
Posted by nestower on Apr 28th, 2008 at 6:21am
HP Server Console Switch 336044-B21
I search for a User Guide of this console switch
-
Posted by eddienabors on Apr 27th, 2008 at 4:49pm
power supply
Lost power supply. What are the specs for the power supply?
Thanks for any help.
-
Posted by bill1904 on Apr 26th, 2008 at 11:32am
NDH305
I have this hub, but not the wall wort. I need to know the power required and plug configuration, and whether a crossover cable is required when using 'uplink'.
-
Posted by bigdog36694 on Apr 22nd, 2008 at 8:17pm
networking
networking
-
Posted by vairo.risoldi on Apr 16th, 2008 at 12:38pm
Help about the dip switch on the NSH812 Ethernet switch
I need the user manual to know the mean of the two dip switch in front.
-
Posted by herta.stadelbauer on Apr 3rd, 2008 at 6:20am
manual
Add products and discussions to your stuff and receive a timely personalized email containing updates, tips and solutions for all the
products you own!
Safer Calling on the Road
Table Saws: Safety First?
Is a Heat Pump Right for Your Home?
Copyright © 2008 OwnerIQ, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.