Login

RSS What is this?
Help Requests

Power Wheelchair




Can You Help With These Problems?

  • Posted by nicoledavis2008 on Sep 29th, 2008 at 10:19pm

    Probelm with chair
    We have replaced the battery 3 times in this chair, and it worked this last time for about a month or so. This morning the owner went to get into the chair and the whole chair just shut down. All the lights started flashing and now it won't do anything but flash. Can anyone give an idea as to what m…
  • Posted by micasproles on Sep 25th, 2008 at 10:04pm

    battery charger
    cannot find Fully automatic 24 volt 1.5 amp XLR connector battery charger from Pihsiang. OEM battery charger for Shoprider Smartie power chairs with lithium iron phosphate batteries.
  • Posted by micasproles on Sep 25th, 2008 at 10:04pm

    battery charger
    cannot find Fully automatic 24 volt 1.5 amp XLR connector battery charger from Pihsiang. OEM battery charger for Shoprider Smartie power chairs with lithium iron phosphate batteries.
  • Posted by pgeroulis on Sep 20th, 2008 at 10:24pm

    service manual
    service manual
  • Posted by blueskies454 on Sep 14th, 2008 at 1:07am

    batteries
    I have had this chair for 1 week. It will not charge. It worked for 3 days and I need an owners manual or some advice about the problem. Could it be the charger? It's my first chair and is badly needed. Thanks for any help.
  • Posted by ksplates on Sep 10th, 2008 at 11:44am

    Repainting Jazzy Power Wheelchair Body
    What type of paint should be used to repaint the body of the Jazzy Power Wheelchair? I have the sample size from the manufacturer but I would like to repaint the entire body.
  • Posted by mccairene60 on Sep 3rd, 2008 at 12:44pm

    joystick
    Have 4-key VSI. turns on or off when press button. I want to replace this on/off system with a metal key that can be removed when I leave chair, so no one can steal chair
  • Posted by mpmartin01 on Aug 18th, 2008 at 1:29pm

    no power
    chair won't power on even after being charged
  • Posted by frogntoad on Aug 17th, 2008 at 1:54pm

    drive control programing
    when joy stick controler is moved in has a delay seams to long before chair responds and in grass has some trouble starting off can the low end torque adjusted. thanks for any help
  • Posted by ladylace2002 on Aug 4th, 2008 at 12:33pm

    what if battery wont work
    the chair was in storage for a time and the batteries completely died have new batteries on chair and it won't work. what do I do? the lights works and it powers up but it won't go. Please help
  • Posted by dbeaton1 on Jul 27th, 2008 at 12:38pm

    flashing lights (older jet 3)
    the lights blink and the chair will not power up. we have checked everything and would like to not pay to have it repaired. would greatly appreciate it if someone could help with the problem.
  • Posted by cgcaballero69 on Jul 23rd, 2008 at 8:55pm

    I need parts
    I need the two parts where the arms are put.I can buy where them?
  • Posted by whusted on Jul 9th, 2008 at 3:05pm

    Chair does not seem to charge
    Chair does not seem to want to charge. also when plugged in to charge the normal blinking lights showing interlocked so it does not move is not coming on.



    batteries are recently new and normally charged and maintained regularly.



    'repacede power cord but still does not charge.



    Checked circu…
  • Posted by lawdog on Jun 29th, 2008 at 7:39am

    chair will not move
    the arm control started just blinking and now it want even com on
  • Posted by pat.watson1 on Jun 4th, 2008 at 3:33pm

    user manual
    purchased second hand
  • Posted by a.jonah on Jun 1st, 2008 at 9:49am

    fixed flat
    i fixed a flat on my m71

    the wheel is scraping on aluminum gear box

    and the bolt holding wheel on loosens up ( the bolt washer and tock fell off once. what is wrong
  • Posted by dougbo1943 on May 28th, 2008 at 5:43pm

    Help
    Chair set for 2 years with no charging of use. I installed new batteries. The charger works, but I get 8 flashing lights and no more.
  • Posted by mettajohnson on Apr 23rd, 2008 at 10:43am

    Change speed
    I understand that the lights for the "mode" setting indicate speed. How do you change that?
  • Posted by grandmacat on Apr 17th, 2008 at 9:01pm

    over heats
    after about 20 min. of running on flat pavement this chair goes into creep mood for a few seconds and than stops completely. It has been checked for codes but finds none. this has been going on for a year. This is preventing a 12 year old from having fun at recess at school. this is his first quicki…

Ask OwnerIQ Members for Help With A Problem

Let the OwnerIQ Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the OwnerIQ membership to view. You will be notified of responses by email. Required fields are in BOLD.


(optional)
Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
  

Recent Blog Posts


Register now to download manuals, solve product problems, read blogs and newsletters, and get a free personal homepage

Recent User Activity



OwnerIQ Network | Manufacturers | About | Research | Press