-
Posted by chatweinman on Jul 23rd, 2008 at 7:05pm
screen
looking for new screen
-
Posted by pablo.nevarez1 on Jul 23rd, 2008 at 4:07pm
Flashing Green Lamp LED
Flashing Green Lamp LED, puts Projector back in Standby Mode. No display to check Lamp Hours. Is this a Bad Lamp?
-
Posted by greyville on Jul 23rd, 2008 at 7:20am
user manual needed
need a user manual please
-
Posted by danielbackx8 on Jul 22nd, 2008 at 8:09pm
lamp rest
i have purchased a new lamp but my projector wont turn on. the standby light is on. however i didnt reset the lamp timer. it is an old model. XV-VW99U. does anyone know how to reset it?
-
Posted by mr.nguyen.79hp on Jul 22nd, 2008 at 8:07pm
manual
vpl-cx75
-
Posted by joevogt3rd on Jul 21st, 2008 at 10:35pm
Repairs
Can you recommend a repair site in St. Louis Mo.
-
Posted by bmmht on Jul 20th, 2008 at 6:37pm
GREEN PROJECTOR
GREEN PROJECTOR IS DISTORTED
-
Posted by yolup14 on Jul 20th, 2008 at 12:21pm
manal
looking for manual
-
Posted by garykaraoke on Jul 20th, 2008 at 4:56am
lamp
lamp has blown,need new one not generic. advise on price
-
Posted by yaelinda on Jul 19th, 2008 at 3:30am
tern off
my projector is terning off after 1 min and than i need to wait and take out the elctricity to tutn it on. its happened agaim after 30 sec
-
Posted by rickfromchurch on Jul 19th, 2008 at 2:28am
reset
projector won't power up. we lost power and now the unit won't come back on. how do I reset the projector?
-
Posted by sfhawes on Jul 18th, 2008 at 11:40pm
Help me!!
Hey, I just bought this used projecter and dont know how to make it work.. can you help me? I have a mac vbut I do have the right connection cords and everything... the projecter has projsected for like 2 sec a few times but we cant get it to project whats on the computer or anything.....
-
Posted by whcrc on Jul 18th, 2008 at 5:58pm
Projector problems
When projecting, the light flickers. Do you know what needs to be changed? Is it the bulb?
-
Posted by cody.davis on Jul 18th, 2008 at 9:55am
Model?
I bought a new house and the existing projector does not have any manuals. Can you please determine what model this? Thanks! Cody
-
Posted by bob.rj.dixon on Jul 18th, 2008 at 9:46am
Poor qualitytext
I have had this projector from new and having seen another of the same model, realise how poor the quality of my text is.It seems to be very blotchy i.e. not black but a hazy mixture of black, grey & white. No matter what I cannot improve it. The only way is to enlarge the image and then it becomes …
-
Posted by doublestack7097 on Jul 15th, 2008 at 7:50pm
keystone
I can't turn the keystone off through the main menu. It's like it's locked through the menu. I was thinking that I need a remote to fix it, but I was wondering how to unlock the aspect ratio in the menu.
-
Posted by nickkick33 on Jul 14th, 2008 at 11:58pm
Lamp timer
How do I reset the lamp timer after replacing the lamp?
-
Posted by bigjohnsfleamkt on Jul 14th, 2008 at 12:08pm
product help
split picture lot of distortion
-
Posted by terryandjanet on Jul 12th, 2008 at 8:21am
WONT WORK
PUT A NEW BULB IN THE PROJECTOR ON 8/2/08 IT GETS USED 12 HOURS A WEEK, AND LAST NIGHT IT WENT OFF THE STANDBY AMBER LIGHT KEEPS FLASHING AND I CANT GET IT TO COME BACK ON PLEASE CAN YOU HELP
-
Posted by visionservices on Jul 12th, 2008 at 7:02am
technical help
DEAR SIR,
I AM USING ABOVE MODEL NO. PROJECTOR. SINCE ITS LAMP LIFE IS NEAR TO END, SO I REPLACED LAMP WITH ORIGINAL ONE,AND RESETED THE LAMP COUNTER ALSO. AFTER SWITCHING ON PROJECTOR WITH NEW LAMP, IT WORKS FOR 5 HRS. AND AFTER THAT, LAMP IS GOING OFF AND PROJECTOR IS GOING IN COOLING MODE. AFTER…
-
Posted by sa on Jul 12th, 2008 at 6:04am
help me
To whom it may concern,
Kindly help me to my projector. I plug in to my computer I ve follow the right instruction but still not working. Ive tried in Dvd video, there its working. I would like to use the projector watching DVD using computer. I bought this projector, for my private mini cinema at h…
-
Posted by hardingj58 on Jul 12th, 2008 at 12:18am
Rolling tint band
There is a line of pink tint that is rolling from the bottom of the display to the top. The lamp has 1270 hours at High Power. I would equate this to low S/N but the remainder of the screen is crystal sharp. Any suggestions?
-
Posted by pjg1 on Jul 11th, 2008 at 4:08pm
postal code for registration purposes
I cannot register as we have no postal codes in dublin, ireland. only an area for example Diblin 6.Ireland
-
Posted by victor.gurrola on Jul 10th, 2008 at 10:36am
reset filter
need to clesn filter
-
Posted by kboswell on Jul 9th, 2008 at 9:45pm
the picture
the picture is upside down
-
Posted by kboswell on Jul 9th, 2008 at 9:45pm
the picture
the picture is upside down
-
Posted by twenty1boy on Jul 9th, 2008 at 8:19pm
help
it just shuts off after like 15 minutes
-
Posted by cyates on Jul 9th, 2008 at 11:34am
manual
i need to know how to replace the bulb
-
Posted by babs122659 on Jul 9th, 2008 at 5:45am
no projection
Green light blinks continuously. There is no projection except for infocus icon.
I have windows xp on a dell laptop. Please advise me how I can fix this?
-
Posted by bobcole on Jul 9th, 2008 at 12:47am
Lamp failure
Standby light is flashing yellow and green. after a while lamp light begins to flash intermittently while standby light turns solid red again. The lamp will notcome out of its socket like it will usually do and turn on...
-
Posted by d.rautenbach on Jul 8th, 2008 at 1:52pm
Not selecting source
The unit works excepting that it won't select a source and display. The unit works and the lamp is functional.....What could be the problem...?
-
Posted by stephenacoughlin on Jul 7th, 2008 at 6:55pm
finding signal
I have hooked up svideo and
and vga imputs but unit does not find signal from my laptop. Any suggestions
-
Posted by neilellenden on Jul 7th, 2008 at 6:37pm
fault
only the red power/standby led is on and steady and not flashing, when you press the on button nothing changes or happens. Any idea whats wrong?
-
Posted by sajikjoseph on Jul 7th, 2008 at 2:57am
Check Lamp Life
I have a sanyo PLC-XP45 LCD projector. Help me to check the lamp life of this projector
thanks
-
Posted by jordan on Jul 3rd, 2008 at 3:37am
unit turns off after about 30 secs from powering on
Hi,
Anybody had this experience with their unit? If so, what was the cause of such?
Thank you
-
Posted by Richings on Jun 25th, 2008 at 10:35am
Lamp wont light up after new install
I have just recently inserted a new Lamp which is the correct lamp for the projector and it fits well inside, it also has been screwed down to keep it secure.
I placed the cover back on with two screws and inserted all the cables needed correctly in the right place. I then powered the projector on …
-
Posted by marknleslieboyd on Jun 22nd, 2008 at 11:27pm
No projection
When I press the power button the fans come on but the bulb never comes on. THere is a new bulb in it. The power light flashes red for about a minute and then turns off the projectors. What can I do to get my projector working again?
-
Posted by frikkie on Jun 18th, 2008 at 4:04pm
projector problem
power light flashes green,can hear lens moving when switching on,fan runs but no vision,cant switch off.
-
Posted by johnkellywork on Jun 17th, 2008 at 12:42am
VPL CX76
Turns on briefly but no image, produces a sound like an electrical arc for a second or two then goes to stand by and shuts down... any help appreciated
-
Posted by peg.clark on Jun 16th, 2008 at 3:37pm
projects in pink
unable to view text or pictures as the pink is so bright there is no cotrat and no ability to change this through the menu as far as I can tell.
-
Posted by dlangem1 on Jun 16th, 2008 at 2:39pm
need to reset buld
LG RD-JT91
-
Posted by groper1602 on Jun 16th, 2008 at 12:40pm
lamp life
turning off replace lamp light
-
Posted by kimstarr6430 on Jun 15th, 2008 at 12:32pm
replaced lampor 15 seconds then shuts off. The lamp does not light up
Starts up f
-
Posted by gvard on Jun 12th, 2008 at 11:07pm
Changing the Lamp
I have this projector and need to take it out of the country. I want to know how to change the lamp in case it burns out. (I have an extra one to take with us.) Please email the info to gvard@dslextreme.com.
Thank you.
-
Posted by srinivas19842002 on Jun 12th, 2008 at 3:48am
Settings of projector display
I connected projector to ceiling. Projector working fine bue display comes reverse (screen reverse). how to set angel correct
-
Posted by timothybrockopp454 on Jun 11th, 2008 at 10:18pm
Doesn't Work Right, Need Advice
Projects dull red image until you hit reset, then it projects fine for 2 seconds and then goes back to the dull red image. Is it shot? Does it need a new bulb or what? I got it as a present this way. Please help! Didn't have any manual with it either so could really use one. Thanks
-
Posted by paintingnow on Jun 9th, 2008 at 2:51pm
Projector won't pick up the image from the computer
I just get a blue screen?
-
Posted by julesm01 on Jun 9th, 2008 at 11:56am
MAC Computer will not display
I can not get the MACBOOK to display on the projector. It detects the projector. I have mirrored and unmirrored the display
Help
-
Posted by silvia.ravara on Jun 8th, 2008 at 4:42pm
manuale italiano
manuale italiano? help !!!
-
Posted by pedersov on Jun 5th, 2008 at 10:18am
Need Lamp Hours
I cannot find how to get the Lamp Hours. How do i check the Lamp hours?
-
Posted by troubleindauk2 on Jun 2nd, 2008 at 10:10am
blue
my projector only shows a blue line halfway across the screen
-
Posted by richard_roman1 on Jun 1st, 2008 at 7:09pm
REAR
DOES NOT TURN ON
-
Posted by firedot67 on May 31st, 2008 at 4:43pm
LCD Project malfunction, please help
After initial turn on and warm up Picture blinks or jumps, and monitor stays on for 2 minutes and goes off and come back on. When it comes on its ok and then it starts to blink and jump alittle. It looses the color also. Sometimes a popping noise is heard.
-
Posted by firedot67 on May 31st, 2008 at 4:43pm
LCD Project malfunction, please help
After initial turn on and warm up Picture blinks or jumps, and monitor stays on for 2 minutes and goes off and come back on. When it comes on its ok and then it starts to blink and jump alittle. It looses the color also. Sometimes a popping noise is heard.
-
Posted by norris23us on May 30th, 2008 at 9:20pm
letter
lamp keep cutting off and power light blinking
-
Posted by cindy on May 30th, 2008 at 1:03pm
Disappearing Cursor
When the laptop goes into hibernation (like on a lunch brake) the cursor disappears from the projected screen image. Any ideas besides taking off hibernation that might cause this? I have to reboot the whole system to get it to work again
Thanks! Cindy
-
Posted by manocesar on May 24th, 2008 at 9:50am
RESET
I changed the lamp but not reset the timer lamp, and now the projector not lights and the lamp is new. What should I do to reset the timer? The lamp indicator illuminates red for every time.
-
Posted by jknighty92 on May 20th, 2008 at 8:24pm
can not connect to my television
i can not get my projector to connect to my television
-
Posted by dineo on May 20th, 2008 at 4:57am
distance
DISTANT BETWEEN THE PROJECTOR AND THE PC
-
Posted by pm_bigscreens on May 17th, 2008 at 1:25pm
lamp timer
how do you reset the lamp timer after lamp change
-
Posted by pguinn on May 15th, 2008 at 4:20pm
Is bulb burned out?
If the bulb will not burn, is there a way to see if it is out other than replacing it?
-
Posted by ckube on May 14th, 2008 at 5:31am
RJ45
Please specify what to do with the RJ45 port in this projector
-
Posted by gyromepeemo on May 11th, 2008 at 1:36pm
No Signal
No signal from computer to projector.
-
Posted by jandjdigitalimaging on May 9th, 2008 at 6:09pm
manual
I need a owners manual.
-
Posted by bconrad on May 8th, 2008 at 12:09pm
projector problem
I have a Sony VPL CX21 projector that will turn on briefly, then shut down with the Temp/Fan indicator lamp light flashing. Any idea what the problem is? Thanks.
-
Posted by mcalder on May 7th, 2008 at 9:17pm
lamp timer reset
I have the HS51 and I need to know how to set the lamp to zero hours
-
Posted by ajsoni.rd on May 7th, 2008 at 3:45am
green and pink shadows
there is bowing on the top and bottom of the screen, and the coloring is displaying green and pink shadows, the picture still has other colors. The TV was just moved into my house 6 weeks ago and worked fine, i moved the TV to a different position in the room and it messed up. One day it worked fi…
-
Posted by cfsmith on May 5th, 2008 at 2:09pm
Replacing Light Bulb
I can't find online how to replace the bulb. What do you have to unscrew to place a new one in? I can't find our owners manual
I want to also order a new bulb to have one ready if this one I have goes out. Which site do you prefer to order from? I don't know which would be safer.
-
Posted by towman864 on May 4th, 2008 at 5:12pm
looking for price
i am looking for a mirror for this tv
-
Posted by bajids on May 1st, 2008 at 7:49am
USER MANUAL
I JUST CAN'T FIND A USER MANUAL FOR THIS PROJECTOR. PLS HELP ME.
-
Posted by kgranlund on Apr 28th, 2008 at 9:03am
Background Green
My projector is displaying all green background.
-
Posted by leejosh78 on Apr 28th, 2008 at 2:18am
user manual
required user manual
-
Posted by chris on Apr 23rd, 2008 at 12:27pm
Keystone
How do i alter the keystone on it?
-
Posted by thallison on Apr 23rd, 2008 at 10:20am
bulb
when I turn the projector on the green light keeps blinking... and projector will not project
-
Posted by shakaaron on Apr 22nd, 2008 at 4:50am
lamp reset
replaced the lamp, need to reset it now
-
Posted by josealln6 on Apr 21st, 2008 at 10:45pm
can't receive channels 65-97
we can not receive channels 65-97. we can't figure out how to auto program or program channels.
-
Posted by tony.higley on Apr 20th, 2008 at 6:31am
reseting lamp timer
unable to resetlamp timer
-
Posted by rgrenin642 on Apr 19th, 2008 at 6:16pm
Adjusting The Color
The overall color of the projector is greenish. I would like to adjust the RGB so I can get a clean gray image. Are there any pots to adjust this issue on the board
-
Posted by gilstone1966 on Apr 18th, 2008 at 7:57pm
on and off
turn power on the green light come on then goes into stand by
-
Posted by dave_swan11 on Apr 17th, 2008 at 5:56am
Picture upside down
i have brought a epson emp-52 but it is set up to work asif it was on a a ceiling, i want to use it on a desk, this means that when i try and use it the picture is upside down. does anyone know how i can change the picture output on the project.
-
Posted by busycee on Apr 15th, 2008 at 11:44am
Power comes on but the lamp does not
I just replaced the lamp in the projector 4 days ago.
The projector worked until yesterday.
The power light, fan and lamp light on the top of the unit comes on but the lamp does not show.
-
Posted by rruiz on Apr 14th, 2008 at 7:03pm
only 1/2 the screen shows
only 1/2 the screen shows
-
Posted by yprefontaine on Apr 14th, 2008 at 10:01am
lamp
the light is low
-
Posted by cousir on Apr 10th, 2008 at 3:24pm
Toshiba TLP 250 Projector
a fan is on at fornt so there is power but no lights on and wont power up
-
Posted by akleven on Apr 10th, 2008 at 1:00pm
first time use
We can not get the projector to start for the first time.
We get the blue piqutre on the whall but it is only searching on video then RGP and S-video.. I have tried Fn + F8 several times and can see the litle piqture in my pc but nothing happens on the whall.. only searching.. Please help urgently …
-
Posted by jojingwa on Apr 9th, 2008 at 8:14pm
KP-43T75
When I turn the power on it goes to the standby mode and the TV doesn't turn on. It keeps blinking in the standby mode with no picture on.
-
Posted by john.freeman on Apr 9th, 2008 at 8:12am
Projected Image is clipped on all sides
Using a Dell Laptop and Windows Media Player or Windows Movie Maker as the imput image, the projected picture gets clipped on all sides from what is displayed on the laptop. I have tried changing laptop resolution, using the "Size" and "Zoom" functions of the projector with no success
Add products and discussions to your stuff and receive a timely personalized email containing updates, tips and solutions for all the
products you own!
Copyright © 2008 OwnerIQ, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.