-
Posted by sambowen3 on Oct 12th, 2008 at 5:49pm
replacing break pads
brakes gone
-
Posted by sambowen3 on Oct 12th, 2008 at 5:49pm
replacing break pads
brakes gone
-
Posted by lindsay_littlelulu on Oct 11th, 2008 at 11:14pm
fuel line
My fuel line is clogged how do I get to it to replace it?
-
Posted by courtlamb on Oct 11th, 2008 at 10:26pm
carburater
carburater settings
-
Posted by louiser2 on Oct 11th, 2008 at 8:17pm
need manual
I bought this machine used and there was no manual.
-
Posted by hemlockbridgefarm on Oct 11th, 2008 at 1:07pm
changing the solenoid
where is solenoid located ?and how difficult to replace? I have the part but need help.
-
Posted by boan on Oct 11th, 2008 at 10:07am
Service manual
Needle thread won't pick up the bobbin thread
-
Posted by boan on Oct 11th, 2008 at 10:06am
Service manual
threaded needle won't pick up the bobbin thread
-
Posted by t_taylor on Oct 10th, 2008 at 7:31pm
fORWARD DRIVE PROBLEM
Mower lost forward drive. Still runs in reverse just not forward. Checked belt seemed ok. Only 40 hrs. on mower
-
Posted by gwenlitchfield1930 on Oct 10th, 2008 at 7:27pm
serger
loose thread
-
Posted by kerr on Oct 10th, 2008 at 6:42pm
belt #
belt problem
-
Posted by tobytom on Oct 10th, 2008 at 10:29am
instruction manual
I bought this snowblower used and it is missing the instruction manual
-
Posted by ostranderslim1 on Oct 10th, 2008 at 9:38am
manual
need to replace clutch
-
Posted by autheru on Oct 8th, 2008 at 8:55pm
manual
need manual
-
Posted by lvenema on Oct 8th, 2008 at 7:20pm
installing gasline+filter
Does the line go from top down, orbottom up ?
-
Posted by satorunakama on Oct 8th, 2008 at 3:42pm
user manual and operator's guide
would like to purchase operator's guide and user manual to model #51 husquevarna chainsaw.
-
Posted by zoolougirl on Oct 7th, 2008 at 9:39pm
no manual
need a manual
-
Posted by rclukkarila on Oct 7th, 2008 at 1:08pm
carborator ajustment
keeps shuting down
-
Posted by rcoon3 on Oct 7th, 2008 at 12:23am
Front End
Not sure what happened but this is whatI got now: When the right front wheel is straight, the left front is cocked out to the left, if you turn the steering wheel and straighten the left, then the right cocks out to the right. I have changed out both R & L draglinks with no help on problem so here …
-
Posted by abolt243 on Oct 6th, 2008 at 1:46pm
need a manual please
came with no manual
-
Posted by dburell on Oct 6th, 2008 at 8:06am
parts
mandrel
-
Posted by forehand on Oct 5th, 2008 at 9:47pm
fuel line
Need to replace fuel line, where does the fuel line enter the gas tank?
-
Posted by forehand on Oct 5th, 2008 at 9:18pm
fuel line
location of fuel line to the gas tank
-
Posted by kenny33 on Oct 5th, 2008 at 6:12pm
chain
titeing the chain
-
Posted by billdump on Oct 2nd, 2008 at 2:23pm
how to start it?
how do i start it?
-
Posted by kr.williams on Oct 2nd, 2008 at 11:15am
Manual
I have just purchased a second hand Victoria Sewing Machine and unfortunately it does not come with a manual or any of the accessories. Can you please help.
Kind regards
Carol
-
Posted by sissie1951 on Oct 2nd, 2008 at 8:21am
head
I've lost my book and can not fiqure out how to change my head,the whole head.help
-
Posted by highprairie on Oct 2nd, 2008 at 12:55am
Serial # 5022044
What year was it made
Thanks
-
Posted by ecalladine on Sep 30th, 2008 at 2:04pm
parts
broken bearing housing for blade of the cutting deck
-
Posted by nanniepapae2004 on Sep 30th, 2008 at 12:58pm
loose blade
blade is loose, can't tighten it. could something be broke that holds the blade on ?
-
Posted by highlandhillsjerry on Sep 29th, 2008 at 9:25pm
manual
need manual
-
Posted by robjeddy on Sep 29th, 2008 at 7:22pm
manual
need operators manual for 26lc
-
Posted by dstroup on Sep 29th, 2008 at 5:11pm
drive belt
Howdo I change the drive belt?
-
Posted by ryan_siki on Sep 28th, 2008 at 6:23pm
manuals
I need a manual for an old husqavarna chansaw
-
Posted by tzimmer82 on Sep 28th, 2008 at 2:38pm
oil gas ratio
I can not recall the oil/gas mixture for my 350
-
Posted by stewartiq on Sep 28th, 2008 at 10:50am
hood sensor won't allow operation
When you put the mower in gear and release the clutch it stalls. Where is the sensor for the closed hood and how to repair.
-
Posted by stevenkorson on Sep 26th, 2008 at 9:19pm
Drive belt falls off
I'm on my third drive belt which is ok. The problem is that the drive belt falls off the engine drive pulley especially when I change gears.
Thanks.
-
Posted by deerslayer200482 on Sep 26th, 2008 at 4:52pm
engine
dosent run on one side
-
Posted by cfullam on Sep 26th, 2008 at 4:21pm
340 chainsaw sprocket replacement
Hi i need help with replacing the main drive sprocket on my chainsaw 340 Husky,,, how do you remove
-
Posted by princewilliamgates on Sep 26th, 2008 at 4:01pm
zero turn mower
I have a zero turn mower ez4217 ,an the speed on the mower are slow an when you cut grass for 20 min it stop pull on the left side an the mower start goingin circle,let the mower cool off an it will cut 20 more min.
-
Posted by katherinerhuland on Sep 26th, 2008 at 7:24am
part #
is there somewhere I can look at part numbers on the web as I need to order screws by the muffler but need to know what #
Thank You
-
Posted by hthjr_ga58 on Sep 25th, 2008 at 1:38pm
starting
I can't get it started need some advice ,,blower was given to me
-
Posted by juilleb9 on Sep 25th, 2008 at 10:39am
The bar says Farm Tough
Sprocket not turning. Don't know how to remove cover and adjust chain.
-
Posted by simms.dan on Sep 24th, 2008 at 8:17pm
won't start
won't start
-
Posted by siets29 on Sep 24th, 2008 at 4:34am
manual/dvd
I inherited a Husqvarna sewing machine, a "#1+" but I don't have any instructions.
-
Posted by rwbn29720 on Sep 23rd, 2008 at 9:50pm
failed drive control cable
I replaced the cable. Now the drive does not work
-
Posted by toddfurse on Sep 23rd, 2008 at 12:48am
fuse
A neighbor gave me this mower a while back and I can't get the starter to work. I'm experimenting around to see why. I discovered it's missing a fuse. Does anyone know what size or type of fuse it takes? Thank you very much.
-
Posted by lesthieme on Sep 22nd, 2008 at 12:37pm
adding lights to mower
trying to add lights to my zero turn mower
-
Posted by gjwebb22002 on Sep 21st, 2008 at 6:44pm
manual
Need owners manual
-
Posted by rapplegate3 on Sep 20th, 2008 at 7:56am
What oil should be used in the hydraulic drives?
I had to replace a shaft in the hydraulic drive and need to refill with oil and I don't know what oil to use.
-
Posted by travrandall on Sep 20th, 2008 at 5:09am
drive belt
routing diagram for fitment of the deck belt
-
Posted by ejmar1 on Sep 19th, 2008 at 9:55pm
Wheel fell off
55R21HVL Push mower. front wheel fell off while cutting the grass.. Not sure which parts are missing or if the axle broke off from wheel
-
Posted by dauph5 on Sep 19th, 2008 at 5:48pm
blade adj
on the highest mowing setting (7) the blade is scalping the lawn,,,is there another adjustment?
-
Posted by gpair on Sep 19th, 2008 at 2:33pm
Engine Manual
for an Intek 24 engine in this model of tractor. Mine loses power under load and will not idle.
-
Posted by merlino on Sep 19th, 2008 at 9:08am
v-belt
need to adjust v-belt, ground drive
-
Posted by dtodd on Sep 18th, 2008 at 5:27pm
belt
The belt on the deck that drives the blades came off.
-
Posted by blackcatinahat on Sep 18th, 2008 at 2:15pm
adjusting highth thingis broken
if looking at mower from the rear, the left side adjusting stuff has come apart or broken or something, and I would like to order whatever parts I need to fix it.
-
Posted by motleyl on Sep 17th, 2008 at 3:20pm
deck belt came off help[
need help placing belt back on
-
Posted by mh102 on Sep 17th, 2008 at 3:14pm
manual
I would like to have a manual for this model chainsaw
-
Posted by walter.justice on Sep 17th, 2008 at 12:48pm
Gas Oil mixture
I can not recall the oil/gas mixture for my 350
-
Posted by njbartleson on Sep 17th, 2008 at 2:46am
No spark
No spark. Any suggestions on how to check coil etc. Thank you!
-
Posted by hjrothe5 on Sep 16th, 2008 at 8:16pm
Looking for manual
Need a manual for Juskylock 430
-
Posted by glasgu on Sep 16th, 2008 at 1:54pm
Manual
I've lost my manual .. can anyone upload a copy to me at glasgu@aol.com. Unfortunately, I need it yesterday. Thanks.
-
Posted by stingray56 on Sep 16th, 2008 at 11:20am
chain saw engine carb clogged
stored too long with bad gas. How do I fix it.
-
Posted by terryandanita on Sep 15th, 2008 at 8:43pm
sharpen
How do I take the blades off to sharpen them?
-
Posted by dundas_tony on Sep 15th, 2008 at 3:25pm
Manual
Can't find this model listed??
-
Posted by dcking2545 on Sep 15th, 2008 at 12:15pm
idle
not sure how to turn idle up.?
-
Posted by equillin on Sep 14th, 2008 at 10:29pm
Owners Manual
Looking for an owners manual
-
Posted by oakstreet50 on Sep 14th, 2008 at 7:44pm
Trimmer line
How do you put the line on the timmer
-
Posted by goss on Sep 14th, 2008 at 6:30pm
Oil mix
Need to know oil mix
-
Posted by goldriverandy on Sep 14th, 2008 at 5:31pm
manual
lawnmower
-
Posted by my3chilins on Sep 13th, 2008 at 9:55pm
manual request
lost my manual
manufacturers model #28754
-
Posted by my3chilins on Sep 13th, 2008 at 9:43pm
lost users manual
I lost my users manual for my husqvarna riding lawn mower and want to change the oil. How can I get a copy of the maneal?
-
Posted by myrrapen on Sep 13th, 2008 at 6:08pm
Owners manual
Misplaced original instruction manual.
-
Posted by hlbonnet on Sep 13th, 2008 at 3:43pm
Starting
Need to know access to replace the spark plug
-
Posted by breeze0009 on Sep 13th, 2008 at 9:44am
spring
where does brake spring go
-
Posted by gmstryker on Sep 12th, 2008 at 7:06pm
removal of clutch locator
the position of the clutch locator is causing a problem of removal- it may have been installed upside down.
-
Posted by mckay on Sep 12th, 2008 at 6:24pm
Engine replacement
I have a 2005? Husqvarna YTH2148 with a seized engine. The engine is a 21 horse, Briggs and Stratton Vanguard. Can I replace it with a Briggs and Stratton Vanguard, 18 horse? Any help would be greatly appreciated.
-
Posted by rysuelli on Sep 12th, 2008 at 9:18am
Stopped chain
Everything on the chain saw works. However the chain will not spin.
-
Posted by oldpaths on Sep 11th, 2008 at 3:57pm
need a parts manual
Mower deck pulley went bad, trying to ID part number.
-
Posted by uremboeve on Sep 11th, 2008 at 10:03am
to buy
please help me i want to buy this product, where do i get it thanks eugene
-
Posted by lbutler on Sep 11th, 2008 at 9:37am
Belt Part Number
I need a part # for Z4824 residenial mower belt
-
Posted by jimmy2542 on Sep 10th, 2008 at 9:13pm
parts
need cable
-
Posted by otismurrell on Sep 10th, 2008 at 8:17pm
help in choosing/replacing engine
My chainsaw just froze on me. I'm thinking the worst and think I might have to replace the engine. Will this manual tell me engine brand and show me how to replace it? While I'm at it, I'd like to know if a higher-power engine will fit in the 359 housing.
Thanks,
Otis Murrell
-
Posted by fwilliams2 on Sep 10th, 2008 at 10:31am
need to install new line
I've misplaced my manual, and need a diagram for installing new cord.
-
Posted by boburwell on Sep 9th, 2008 at 10:09pm
manual
scored piston/cylinder
-
Posted by shudson21 on Sep 9th, 2008 at 7:42pm
Oil
Just need to know what type of oil to use.
-
Posted by billyhoe22 on Sep 9th, 2008 at 6:31pm
wont throttle up.
my saw will idle but when you hit the trottle it runs roughly and eventually backfires out the carb and muffler then quits. What do i need?
-
Posted by roland.parker on Sep 9th, 2008 at 3:04pm
oil & fuel Ratio
what is the oil & fuel Ratio
for this saw
-
Posted by virgilrobbins on Sep 9th, 2008 at 2:20pm
owners manual
i would like an owners manual
-
Posted by lonred67 on Sep 8th, 2008 at 11:32pm
OIL CG INDICATOR RESET
oil level indicator flashes after oil cg how do I reset?
-
Posted by tonygo74 on Sep 8th, 2008 at 2:43pm
Grass Catcher
I need to know if this model will fit a 42" poulan pro riding lawnmower
-
Posted by handiman50 on Sep 8th, 2008 at 12:05pm
OWNERS MANUAL
WOULD LIKE OWNERS MANUAL
-
Posted by paulgriffiths on Sep 8th, 2008 at 10:56am
Spare parts wanted
We have a Husqvarna 67522ES Push Lawn Mower but require the following parts.
2 off front drive wheels part no. 532 40 05-43 and 1 off vee belt part no. 532 19 68-57. Please advise where i can locate. My mobile is 07766754487
Thanks,
Paul Griffiths
-
Posted by j.fletcher on Sep 8th, 2008 at 9:53am
manual
need manual
-
Posted by samt on Sep 8th, 2008 at 9:19am
transmission
will not go forward or backward except in high range. belt appears to be in good shape and tight,low hours.
-
Posted by tmkenna99 on Sep 7th, 2008 at 9:52pm
125L pull cord replacement
I am trying to replace the pull cord on my 125 L. Unfortunatly, the hub will not engage the return spring. Is there a trick?
-
Posted by findingbethany on Sep 7th, 2008 at 6:37pm
Where can I purchase blade for this model?
The blade got bended and we need to replace it. Can we purchase this part on line and replace it ourselves? Thanks.
-
Posted by levaughn_ultimateshine on Sep 7th, 2008 at 5:52pm
Wont Start
We put a adjustable throttle on ours and i think it ran to fast for to long and when we put it back original it wont start checked fuel, spark plug, cleaned carb and it still wont start. any suggestions
-
Posted by toddbossier on Sep 7th, 2008 at 5:34pm
Locating the Belts for replacement
Having trouble locating the Mower Drive belt for this model. Its the belt that goes above the deck on the 5 pulleys to engage the blades for cutting
Add products and discussions to your stuff and receive a timely personalized email containing updates, tips and solutions for all the
products you own!
Get Your Home Ready for Winter
Safer Calling on the Road
Table Saws: Safety First?
Copyright © 2008 OwnerIQ, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.