-
Posted by pcheuk on Jul 8th, 2008 at 3:49pm
Noise from the rear
There are noise coming from the rear roller after a few minutes of usage. Would it be the rear roller goes bad?
-
Posted by skywrite on Jul 8th, 2008 at 7:50am
Cut Out
The treadmill runs for a short while and then cuts out and resets. ie it drops the power goes dead and then resets itself. How do I fix this please
-
Posted by sarahandjared on Jul 7th, 2008 at 10:02pm
belt slows
We haven't used this treadmill in a few years, and it has been sitting in a barn. When I step on it to walk, it slows down to around 1, then speeds back up to whatever I had it, then repeats this. Do I need to lubricate it, or tighten the belt?
-
Posted by lespatbrowning on Jul 6th, 2008 at 6:09am
belt replacement
how to replace walking belt?
-
Posted by jpso on Jul 4th, 2008 at 6:00pm
operating problem
belt stops and starts; speeds up on its own
-
Posted by f1956 on Jul 2nd, 2008 at 7:41pm
problem
turned on unit, runs but belt does not engage
any suggestions?
-
Posted by dschultz1 on Jun 23rd, 2008 at 9:25am
Treadmill Track
My Treadmill track has moved to the right and I cannot keep it centered. The track is rubbing on the right edge. I have tried pushing it to the left but it moves back to the right.
-
Posted by dschultz1 on Jun 23rd, 2008 at 9:25am
Treadmill Track
My Treadmill track has moved to the right and I cannot keep it centered. The track is rubbing on the right edge. I have tried pushing it to the left but it moves back to the right.
-
Posted by dschultz1 on Jun 23rd, 2008 at 9:25am
Treadmill Track
My Treadmill track has moved to the right and I cannot keep it centered. The track is rubbing on the right edge. I have tried pushing it to the left but it moves back to the right.
-
Posted by jsabella on Jun 12th, 2008 at 12:23pm
reset incline
how do you reset the incline on this treadmill? It seems to be stuck in one position. Thanks.
-
Posted by gregfrisch on Jun 8th, 2008 at 10:15pm
manual
need to know how to program for fitness etc
-
Posted by jervwel on Jun 2nd, 2008 at 1:24pm
tread run's when power is turned on
When power switch is turned on tread mill run's full speed and none of the contorls work or do anything . The only way to stop it is turn off the power switch. What should I be looking at to fix this problem.
-
Posted by tsfay on May 31st, 2008 at 4:52pm
back end cover
do you have the back end cover for the 740cs that would hold the adjustment screws for the belt?
-
Posted by bharris on May 31st, 2008 at 12:13am
need to find owners manual/user manual
Just bought a 7.5 distance trainer model pftl 78007 and would like to get a owners/users manual for this treadmill.
-
Posted by southwind90 on May 19th, 2008 at 6:43pm
I need a manual so that I can put it together, seems I lost mine
Need a manual to put it together
-
Posted by mustangryder64 on May 18th, 2008 at 10:30pm
MAJOR PROBLEM WITH SPEED UP
Our treadmill will stop and then speed up very quickly. I have had Sears here 3 times and replaced several parts. A belt, Roller and the control board. In fact they were just here on the 15th of this month. Can you give me some insight as to what it may be? We love our treadmill but have had problem…
-
Posted by jessdudas on May 11th, 2008 at 3:35pm
space saver feature
how do you lower the treadmill after you fold it into the space saver feature
-
Posted by s.r.zakharov on May 10th, 2008 at 12:15am
Incline stuck
The incline is stuck and does not readjust to '1'....can someone help? I've tried the instructions from the manual and it doesn't work....
-
Posted by sharirandles on May 8th, 2008 at 10:06pm
start will not start the treadmill
i used one of the pre-built programs and now when I punch start, the treadmill will not start. we have unplugged & let sit & use the swith by the power cord to turn off but nothing. the panels light up with zeros, the incline works but nothing runs when start is used. normally i just walk with no…
-
Posted by sharirandles on May 8th, 2008 at 9:47pm
problem
Product will not start. The leds light but the unit will noe run
-
Posted by bltat80 on May 2nd, 2008 at 9:46am
lubrication
How do I lubricate the the rollers and any other part and what do I use.
-
Posted by elmanor1 on Apr 26th, 2008 at 12:29pm
Incline stuck in up position
A service person showed me a series of buttons to press to reset the incline but I forgot. The user's manual trouble shooting fix does not work. Does anyone know the correct set of buttons to push to reset the incline?
-
Posted by ashaunta on Apr 24th, 2008 at 2:53pm
The treadmill doesn't move
I have had this treadmill for about 12 years, and one day without any indication of a issue the belt does not turn any more, when you insert the key the display lights up when you try to go to any speed the belt doesent move.
-
Posted by myoung on Apr 21st, 2008 at 12:08pm
belt slips
the belt on my treadmill slips when I run. How can I fix this?
-
Posted by sszabo on Apr 13th, 2008 at 8:01pm
model number
Can you tell me where is the model number on a 725EX proform treadmill
Add products and discussions to your stuff and receive a timely personalized email containing updates, tips and solutions for all the
products you own!
Copyright © 2008 OwnerIQ, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
