search our site:
RSS What is this?
Help Request

Aiwa Car CD Player cdcx217yu

wireing harness
Posted by jklasen2105 on Sep 10th, 2008 at 12:00am

need harness wire posission

Add a Comment Comment (1)

2 members are looking for a solution to this problem.



Comment On This Problem

  • aiwa CDC-X217Yu Wiring harness position
    Posted by fbivet-chacecc on Sep 27th, 2008 at 2:22am

    Looking at the unit from the back, there are 16 pins. I will number from top left corner pin as #1 then pin directly under pin #1 will be pin 2 and so forth with #16 pin being the far right bottom pin. Pin #1 = White wire Front left pos speaker. #2 = White/black wire front left neg speaker. #3 = Green wire rear left + speaker. #4 Green black wire rear left neg speaker. #5 = violet rear right pos speaker. #6 violet black wire rear right neg speaker. #7 = gray wire front right pos speaker. #8 gray black wire front right neg speaker. #9 and #10 are blank. #11 = blue wire power antenna. #12 blank. #13 = red wire 12 volt pos switched. #14 blank. #15 = black wire 12 volt ground. #16 = yellow wire 12 volt pos always hot. I assume you should install a fuse in the yellow wire. Hope that helps you.

    Was this comment useful?

Add Comment


(optional)
If you have a helpful URL, add it here.
Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 

Recent Blog Posts



Recent User Activity



OwnerIQ Network | Manufacturers | About | Research | Press