The User Manual Site - We found it so you don't have to!

Connect Frame to Tent Insert one pin into the end of main tent pole at tent corner. (illus. 3, illus. 4) Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pin into the pole end. Repeat for second pole. Insert pin into the end of side pole, go to opposite end of pole and apply pressure until you arch the pole and can insert the pin into the pole. (illus. 3, illus. 4) Repeat for other side pole. CRESTLINE TM 9'10"x7' 1 Layout & Positioning of Tent, Pole Assembly Layout and position tent with door facing desired direction. (illus. 1) Unzip door. Stake down tent corners only, using the stake loops. Keep the floor taut. (Intermediate loops will be staked later.) Assemble frame poles by interlocking shock-corded poles. (four poles) Insert the poles into pole sleeves.The longer black poles should cross forming an "X" in the middle of tent. The shorter side grey poles insert into sleeves running front to back. (illus. 1) 2 When You Are Ready To Set Up Your Tent Select a level campsite clear of rocks, branches and other hard or sharp objects. Do not set up your tent under trees. For best results in windy conditions, position the end of tent into the wind. (2) Rainfly Poles Side poles (Grey) Assembled poles inserted through pole sleeves Instructions apply to Part Number 9277E107 illus. 1 illus. 2 Tent stake through ring on stake loop illus. 4 Tent frame set-up Part No. 9277E102 Part No. 9277E103 Part No. 9277E104 illus. 3 Insert pin into pole end Rainfly Part No. 9277E105 (2) Main Tent Poles (Black) (2) Side Poles (Grey) POLE ASSEMBLY PARTS