The User Manual Site - We found it so you don't have to!

Layout & Positioning of Tent, Pole Assembly Layout and position tent with doors facing desired direction. (illus. 1) Stake down tent corners, using the tent stake loops. Keep the floor taut.(illus. 2) Assemble all poles by interlocking shock-corded poles. Insert the longer Center Frame Poles into Center Pole Sleeves. The poles should cross forming an "X" in the middle of tent. (illus. 1). Insert the shorter Side Frame Poles through the pole sleeves located at the sides of tent. (illus. 1). Connect Frame to Tent Unzip doors Locate the Pin & Ring Systems on either side of the front doors and the corresponding Pin & Ring on the back side of tent. Insert one end of Frame Pole onto Pin & Ring System on tent stake loop on either side of the doors (illus. 3) Go to opposite end of pole diagonally from starting point and gradually apply pressure to the pole forming an arch until you are able to insert the Pin into pole end. Repeat for second poleAttach tent frame clips to poles 13'x13' 3 Room Dome Tent 1 2 When You Are Ready To Set Up Your Tent Select a level campsite clear of rocks, branches and other hard or sharp objects. Do not set up your tent under trees. For best results in windy conditions, position the end of tent into the wind. See owners manual for more tips. Side Tent Poles Rainfly Pole Rainfly Part No. 9270A104 Center Tent Poles POLE ASSEMBLY PARTS DoorDoor Instructions apply to Part Number 9270B133 illus. 1 illus. 2 Tent stake through stake loop illus. 4 Center section upright Part No. 9270-102 Part No. 9270-105 Part No. 9270-103 Illus. 3 Ring & Pin System Center poles Side pole Side pole Center poles Sidepole Sidepole