The User Manual Site - We found it so you don't have to!

Connect Frame to Tent Insert one pin into the end of main black tent pole to the side of the door. (illus. 3), (illus. 4) Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pin into the pole end. Repeat for second pole. Insert remaining pin into the end of side pole, go to opposite end of pole and apply pressure until you arch the pole and can insert the pin into the pole. (illus. 3), (illus. 4) Repeat for other side pole. Pebble CreekTM 20'x11' 1 Layout & Positioning of Tent, Pole Assembly Layout and position tent with doors facing desired direction. (illus. 1) Unzip doors. Stake down tent corners, using the stake loops. Keep the floor taut. (illus. 2) Stake down tent through the rings on the pin and ring system. Assemble frame poles by interlocking shock- corded poles. (four poles) Insert the poles into pole sleeves. The longer black poles should cross forming an "X" in the middle of tent. The shorter side grey poles insert into sleeves running front to back. The shorter black center pole runs straight front to back. (illus. 1) 2 When You Are Ready To Set Up Your Tent Select a level campsite clear of rocks, branches and other hard or sharp objects. Do not set up your tent under trees. For best results in windy conditions, position the end of tent into the wind. (2) Rainfly Poles Side poles (Grey) Short Center Pole (Black) Assembled poles inserted through pole sleeves Instructions apply to Part Number 9272-210C illus. 1 illus. 2 Tent stake through ring on stake loop illus. 4 Tent frame set-up Part No. 9272-321 Part No. 9272-323 Part No. 9272-325 Part No. 9272-315 illus. 3 Insert pin into pole end Rainfly (2) Main Tent Poles (Black) (2) Side Poles (Grey) Part No. 9272-319 Part No. 9272-317 (1) Center Pole (Black) (2) Upright Poles (Black) POLE ASSEMBLY PARTS