Furuno Marine Radar Operator's Manual
Manufacturer: Furuno U.S.A., Inc.
Model Name/Number: 1715
Product Type: Radar Detector
Introduction to Furuno Marine Radar Operator's Manual :
Congratulations on your choice of the
FURUNO MODEL 1715 Marine Radar.
For over 50 years FURUNO Electric
Company has enjoyed an enviable reputation
for innovative and dependable marine
electronics equipment. This dedication to
excellence is furthered by our extensive
global network of agents and dealers.
Your radar is designed and constructed to
meet the rigorous demands of the marine
environment. However, no machine can
perform its intended function unless installed,
operated and maintained properly. Please
carefully read and follow the recommended
procedures for installation, operation, and
maintenance.
We would appreciate hearing from you, the
end-user, about whether we are achieving our
purposes.
Thank you for considering and purchasing
FURUNO equipment.
Furuno Marine Radar Operator's Manual Table of Contents:
SAFETY INSTRUCTIONS............................ii
FOREWORD............................................... iii
SYSTEM CONFIGURATION....................... iv
EQUIPMENT LISTS..................................... v
1. OPERATION
1.1 Controls
1.2 Indications
1.3 Turning Power On/Off
1.4 Transmitting, Standby
1.5 Adjusting Display Contrast, Brilliance
1.6 Choosing the Range
1.7 Receiver Sensitivity
1.8 Suppressing Sea Clutter
1.9 Suppressing Rain Clutter
1.10 Measuring the Range
1.11 Measuring the Bearing
1.12 Shifting the Display
1.13 Zoom
1.14 User Menu Overview
1.15 Heading Line
1.16 Interference Rejector
1.17 Noise Rejector
1.18 Echo Trail, Trail Brilliance
1.19 Echo Stretch
1.20 Guard Alarm
1.21 Watchman
1.22 Suppressing Long-range Rain Clutter
1.23 Panel Backlighting
1.24 Hue
1.25 Resetting Distance Run
1.26 PROG Key
1.27 Outputting Target Position to a Plotter. 13
1.28 Turning Navigation Data On/Off
1.29 Setting up Nav Data Displays
1.30 System Menu
2. MAINTENANCE, TROUBLESHOOTING
2.1 Maintenance
2.2 Replacing the Fuse
2.3 Troubleshooting
2.4 Diagnostics
2.5 Test Pattern
2.6 Clearing the Memory
2.7 Replacing the Magnetron
2.8 Replacing the Synchro Belt
3. INSTALLATION
3.1 Antenna Unit Installation
3.2 Display Unit Installation
3.3 Wiring
3.4 Adjustments
3.5 Magnetron Heater Voltage
MENU TREE
SPECIFICATIONS..................................SP-1
Here Is the Cover Page Text:
MARINE RADAR MODEL 1715